Waveshare RP2040-Zero

The Waveshare RP2040-Zero is a tiny development board based on the Raspberry Pi RP2040 microcontroller.

Interfaces

Interface Hardware Supported TinyGo Support
GPIO YES YES
UART YES YES
SPI YES YES
I2C YES YES
ADC YES YES
PWM YES YES
USBDevice YES YES

Pins

Pin Hardware pin Alternative names PWM
D0 GPIO0 I2C0_SDA_PIN, UART0_TX_PIN, UART_TX_PIN PWM0 (channel A)
D1 GPIO1 I2C0_SCL_PIN, UART0_RX_PIN, UART_RX_PIN PWM0 (channel B)
D2 GPIO2 I2C1_SDA_PIN PWM1 (channel A)
D3 GPIO3 I2C1_SCL_PIN, SPI0_SDO_PIN PWM1 (channel B)
D4 GPIO4 SPI0_SDI_PIN PWM2 (channel A)
D5 GPIO5 PWM2 (channel B)
D6 GPIO6 SPI0_SCK_PIN PWM3 (channel A)
D7 GPIO7 PWM3 (channel B)
D8 GPIO8 UART1_TX_PIN PWM4 (channel A)
D9 GPIO9 UART1_RX_PIN PWM4 (channel B)
D10 GPIO10 SPI1_SCK_PIN PWM5 (channel A)
D11 GPIO11 SPI1_SDO_PIN PWM5 (channel B)
D12 GPIO12 SPI1_SDI_PIN PWM6 (channel A)
D13 GPIO13 PWM6 (channel B)
D14 GPIO14 PWM7 (channel A)
D15 GPIO15 PWM7 (channel B)
D16 GPIO16 NEOPIXEL PWM0 (channel A)
D17 GPIO17 PWM0 (channel B)
D18 GPIO18 PWM1 (channel A)
D19 GPIO19 PWM1 (channel B)
D20 GPIO20 PWM2 (channel A)
D21 GPIO21 PWM2 (channel B)
D22 GPIO22 PWM3 (channel A)
D23 GPIO23 PWM3 (channel B)
D24 GPIO24 PWM4 (channel A)
D25 GPIO25 PWM4 (channel B)
D26 GPIO26 A0, ADC0 PWM5 (channel A)
D27 GPIO27 A1, ADC1 PWM5 (channel B)
D28 GPIO28 A2, ADC2 PWM6 (channel A)
D29 GPIO29 A3, ADC3 PWM6 (channel B)

Machine Package Docs

Documentation for the machine package for the Waveshare RP2040-Zero

Flashing

UF2

The Waveshare RP2040-Zero comes with the UF2 bootloader already installed.

CLI Flashing

  • Flash your TinyGo program to the board using this command:

    tinygo flash -target=waveshare-rp2040-zero [PATH TO YOUR PROGRAM]
    
  • The Waveshare RP2040-Zero board should restart and then begin running your program.

Troubleshooting

Any troubleshooting tips go here.

Notes

You can use the USB port to the Waveshare RP2040-Zero as a serial port.